Visit
Official Website
0

Edustream Sdn Bhd
11, Jalan Perniagaan Setia 9,
Taman Perniagaan Setia,
81100 Johor Bahru,
Johor, Malaysia.
+607-562 7331
+607-562 7335
onlinesalesedu@gmail.com

AURORA A3 HOT LAMINATOR OPERATING INSTRUCTION LM3241HS

AllStationery & CraftSchool & Office EquipmentLaminator

Previous 4 / 6 Next


PART NAME:
 
1)POWER INDICATOR
2)READY INDICATOR
3)POWER SWITCH
4)ENTRANCE OF LAMINATOR
5)SUPPORT
6)RELEASE BUTTON PRESS TO RELEASE JAMMED PAPER
 
OPERATING STEPS
 
1.INSERT THE POWER PLUG INTO AN ELECTRIC SOCKET AND SLIDE THE POWER SWITCH TO RIGHT OR LEFT BASED ON THE POUCH YOU USE. THE POWER INDICATOR WILL LIGHT UP.
2.WAIT 3-5 MINUTES FOR MACHINE TO WARM-UP. THE READY INDICATOR WILL LIGHT UP WHEN THE MACHINE REACHES PROPER TEMPERATURE.
3.PLACE THE ITEM BEING LAMINATED INTO A LAMINATING FILM LEAVING A 3MM-9MM BORDER FROM THE SEALED END OF THE POUCH.
4.INSERT THEM TOGETHER INTO THE ENTRANCE OF LAMINATOR TO PREVENT JAMMING OR CREASING, INSERT SEALED EDGE FIRST. THEY WILL BE LAMINATED AUTOMATICALLY.
5. AFTER LAMINATING, THE ITEM WILL BE VERY HOT AND SOFT. HANDLE IT WITH CARE. PRESSING THE ITEM WITH A BOOK OR OTHER HEAVY OBJECTS MAY HELP MAKE IT EVEN.
 
*INSERT THE ITEMS TO BE LAMINATED INTO THE POUCH
*INSERT THE POUCH TOGETHER ITEMS INTO THE ENTRANCE OF THE MACHINE
*LAMINATING AUTOMATICALLY
 
USE PROPER SIZE OF  LAMINATING POUCH FOR THE ITEM TO BE LAMINATED , DO NOT CUT THE POUCH TO FIT THE SMALL ITEMS,IT WILL BE JAMMED INSIDE THE LAMINATOR
 
*CARE AND CLEANING
 
SINCE THE DEPOSITS OF RESIDUE WILL INFLUENCE THE EFFECT OF LAMINATING , PLEASE CLEAN THE ROLLERS PERIODICALLY AFTER USE . INSERT A FOLDED LETTER SIZE PAPER INTO THE ENTRANCE OF LAMINATOR.THE PAPER WILL COME OUT WITH ANY RESIDUE PRESENT. REPEAT SEVERAL TIMES TO CLEAN THE ROLLERS, IF THE ITEMS  BEING LAMINATED IS JAMMED , PRESS THE RELEASE BUTTON TO REMOVE IT.
 
*SAFETY INSTRUCTIONS:
 
1. UNPLUG THE MACHINE FROM THE WALL OUTLET BEFORE CLEANING . IF NEEDED THE HOUSING CAN BE CLEANED WITH A CLOTH , DAMPENED WITH A MILD SOAP AND WATER SOLUTION.
2.PLEAS DO NOT ALLOW CHILDREN ACCESS TO THE MACHING.
3.PLEASE DO NOT INSERT ANYTHING INTO THE MACHINE OTHER THAN LAMINATING FILMS AND SUGGESTED ITEMS .THE MACHINE IS ONLY TO BE USED FOR LAMINATING.
4.NEVER DISASSEMBLE , REPAIR OR REDESIGN THE MACHINE ON YOUR OWN.
5.NEVER USE THE MACHINE NEAR A STOVE OR IN A HUMID ENVIRONMENT. DO NOT TOUCH THE PLUG WITH WET HANDS OR IMMERSE THE BASE IN ANY LIQUID.
 
*BE SURE THE POWER SWITCH IS IN THE ''OFF'' POSITION BEFORE PLUGGING IN THE LAMINATOR
 
*TECHNICAL DATA
VOLTAGE-220-240V  50/60Hz
POWER-720W
CURRENT-3A
LAMINATING POUCH RANGE-100MIC
MAX . DOCUMENT SIZE-335MM
WARM UP TIME-3-5 MIN
SPEED-480MM/MIN
 
*WARNING
 
-DO NOT CUT UP LAMINATE FILM BEFORE LMINATION.
INCOMPLETE LAMINATE FILM MIGHT JAM IN LAMINATOR.
 
-FOR SMALLER DOCUMENT , LAMINATE IN FULL LAMINATE FILM THEN ONLY CUT UP
 
-INSERT SEALED END OF POUCH INTO LAMINATOR. 
DO NOT PULL  POUCH THROUGH LAMINATOR.

 Contact Us 
We're here to help and answer any question u might have. We look forward to hearing from you.

© 2020 - 2024 Edustream Sdn Bhd       200601034579 (754338-H)
Visitors: 2506903
Powered by N.MY
You have 0 items in you cart. Would you like to checkout now?
0 items
available in